DEM-U030046: Internal Control Module Software Incompatibility. System Internal Failures. Calibration / Parameter Memory Failure (2009-2010): Fault-Tracing: Fault-Tracing: Information

In exceptions the fault code can be generated as a result of a damaged control module. However, do not replace control module, unless complete troubleshooting has been performed according to all earlier steps in the troubleshooting, and no other faults have been confirmed. Also, do not replace control module if the fault is intermittent.

Has the fault been remedied? 

• YES 

  Refer to REPLACING THE CONTROL MODULE 

• NO 

  Refer to INFORMATION