Connecting The Breakout Box
- Ignition off
- For information on releasing the forward sensoring module (FSM) connector, see COLLISION WARNING CONTROL MODULE
Connect the breakout box see 9511428 and cable harness see 9511499 to the adapter.
Forward Sensing Module (FSM)
- Connect the adapter see 9512984 to control module connector C1.
- For connector C1, terminals #C1:1-#C1:30 correspond to terminals #1-#30 on the breakout box.
NOTE:
Before the control module can be checked and readings taken, the removed fuses must first be refitted.
Other information
- For further information on signals and other values, see SIGNAL SPECIFICATION
- For further information on fuses and grounding points, see the relevant wiring diagram.