Signals From Start Control Module (SCU) To Central Electronic Module (CEM)
Indicates the signals transmitted via LIN from the start control module (SCU) to the central electronic module (CEM).
The values that may be shown are:
- Switch 1 by start button (LIN signal). Not activated/Activated
- Switch 2 by start button (LIN signal). Not activated/Activated
- Switch 1 by start button, directly connected, Not activated/Activated (shows status of the directly connected signal from switch 1 by start button)
- Contact breaker for indicating key in ignition switch. Not activated/Activated
- Contact breaker for activating key ejection. Not activated/Activated
Contact breaker activated only when the key is docked and pressed in at removal.
- Locking key. Not activated/Activated