Diagnostic Trouble Code (DTC) Information RDAR-U30004A
Condition
The remote digital audio receiver module (RDAR) compares its configuration ID with the signal configuration the central electronic module (CEM) transmits on the CAN network. f the configuration IDs do not correspond the fault code is stored.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The configurations IDs do not correspond.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position I and II.
Substitute Value
- None.
Possible Source
- Incorrect CAN configuration ID. The node is not intended for this vehicle, e.. sed control module with other software/hardware.)
Fault symptom[s]
- Digital Radio; No Functionality