Replacing A Component

Erase DTCs from the Phone module (PHM) and restart the control module by clicking the symbol for VCT2000. Continue according to the instructions there.

If the diagnostic trouble code is intermittent the problem has been solved during restart.

If the diagnostic trouble code is permanent, replace Phone module (PHM).

Other information 

• see LOCATION OF COMPONENTS
• see PHONE MODULE (PHM)

Fig 1: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

Courtesy of VOLVO CARS CORPORATION

Fig 2: Identifying Control Module

Courtesy of VOLVO CARS CORPORATION

Was a fault detected? 

• YES 

  Refer to VERIFICATION 

• NO 

  FAULT TRACING FAILED:  The fault should have been detected and remedied. As this is not the case fault-tracing has failed. Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.