LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volvo >> 2008 >> XC70 >> Repair and Diagnosis (Single Page) >> Steering >> Electronic Steering >> Power Steering Control Module (PSCM) And Steering Angle Sensor (SAS) Diagnostic Trouble Codes >> PSCM-U042868 Invalid Data Received From Steering Angle Sensor Module. Algorithm Based Failures. Event Information (2011-2012) >> Diagnostic Trouble Code (DTC) Information PSCM-U042868
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Trouble Code (DTC) Information PSCM-U042868

Condition 

The control module is continually supplied with necessary information from the Steering wheel angle sensor module (SAS) via CAN communication. The control module checks the quality of the information from the Steering wheel angle sensor module (SAS).

The diagnostic trouble code (DTC) is stored if the control module detects:

The control module's test for the diagnostic trouble code (DTC) starts in the event of:

NOTE:

The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.

Fig 1: Locating Power Steering Control Module (PSCM)
GLL173556Courtesy of VOLVO CARS CORPORATION

Possible Source 

Fault symptom[s]