PHM-U1A4E96 Control Module Internal Power Handset Supply. Component Failures. Component Internal Failure (2009-12): Fault-Tracing: Verification
Erase DTCs and reread the DTCs from the Phone module (PHM) by clicking the symbol for VCT2000.
NOTE:
After erasing DTCs there is a delay to ensure that the diagnostics for the Phone module (PHM) have been carried out.
Check that the current DTC has disappeared or changed status from permanent to intermittent fault.
Are the diagnostic trouble code (DTCs) still stored?
- YES
Refer to INFORMATION
- NO
OKAY: Troubleshooting has been completed.