CEM-B10A206 Crash Input. General Failure Information. Algorithm Based Failures (2010-2012): Fault-Tracing: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS CORPORATION

Fig 2: Identifying Connector(s) Reinstallation

Courtesy of VOLVO CARS CORPORATION

• Ignition off
• Reinstall the connectors, components etc.
• Switch on the ignition for at least 10 seconds.

  Try communicating with the control module by selecting one of the functions for vehicle communication under the Diagnostic tab.