LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volvo >> 2009 >> C30 R-Design, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Starting System And Clock Display - Symptom Related Diagnostic Procedures >> Check The Start System (2009-2013) >> Check The Start System >> Checking The Park / Neutral Position (PNP) Function In The Gear Position Sensor (Only Vehicles With Automatic Transmission) >> Replacing A Component
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Replacing A Component

CAUTION:

Avoid touching the pins in the control module and the corresponding connector on the cable harness.

There is a risk of static discharge which could damage the control module.

Discharge yourself and tools to be used by holding the tool's metal part and touching a body part on the car just before starting to work.

If voltage is approximately 0 V on terminal #B15 on the Engine Control Module (ECM), when the gear-shift position sensor is in position P or N, the circuit for the gear-shift position sensor is working.

The fault may be in the Engine Control Module (ECM).

Try replacing Engine Control Module (ECM).

NOTE:

Before replacing the control module, ensure that all other relevant symptom tests have been carried out.

scientia non olet · About LEMON Manuals