Checking The System, "Keyless Vehicle"

HINT: If diagnostic trouble codes (DTCs) have been stored in the Keyless vehicle module (KVM), which indicate a fault in the Remote Keyless Entry (RKE), fault-trace according to these before carrying out the fault-tracing below. 

If this diagnostic trouble code (DTC) has been stored in the Keyless vehicle module (KVM), this means that the Keyless vehicle module (KVM) does not recognize the key code in the remote control that has been used to start the vehicle "keylessly"

Perform a so called "Keyless vehicle start".

Check using all the vehicle's remote keys.

Is the function OK? 

• YES 

  Refer to FAULT-TRACING INFORMATION 

• NO 

  Refer to CHECKING THE COMPONENT