Checking The Component And Wiring
- Ignition off
- Disconnect connector A from the phone module (PHM)
- Disconnect the connector for the Volvo On Call switch.
Check the cables at control module connector A for the internal microphone. Check for a short-circuit to ground.
Check between:
- terminals #15 (#15) and #14 (#14)
- terminals #15 (#15) and #13 (#13)
- terminals #15 (#15) and #6 (#6).
Try replacing the microphone if the cables are OK.
Remedy as necessary.
Other information:
- see SIGNAL SPECIFICATION
- see CONNECTING THE BREAKOUT BOX
- see LOCATION OF COMPONENTS
- see PHONE MODULE (PHM)
- see SWITCH VOLVO ON CALL
- see CONTENTS
- Continue
Refer to VERIFICATION