LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volvo >> 2009 >> C30 R-Design, Automatic >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Driver's Seat Memory Function - Symptom Related Diagnostic Procedures >> Checking Memory Function In Driver's Seat (2008-2013) >> Checking Memory Function In Driver's Seat >> Updating Software For Vehicles With Keyless Entry (KVM):
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Updating Software For Vehicles With Keyless Entry (KVM):

Download new software to the central electronic module (CEM).

After new software has been loaded, check that the memory function in the driver's seat works by doing the following:

1. Make sure that two different seat positions are saved on key 1 and 2.

2. Make sure that the seat is in another position than the saved position for key 2.

3. Lock the vehicle using key 1.

4. Wait 2-3 minutes.

5. Unlock the vehicle with key 2, by pulling on the handle.

6. Open the driver's door.

The driver's seat shall now reset to saved position for key 2.

NOTE:

It is important that you wait at least 2-3 minutes before the vehicle is opened with key 2. Also, key 1 must be at least 1.5 meters from the vehicle.

Remedy as necessary.

scientia non olet · About LEMON Manuals