Description Of Frozen Values: Explanation
The values described below were stored in the memory of the brake control module (BCM) when the diagnostic trouble code (DTC) was stored.
All parameters do not need to be implemented in the brake control module (BCM). This varies from system to system.
NOTE:
Parameters marked with STC (stability and traction control)/DSTC (dynamic stability and traction control) are only displayed on cars equipped with STC (stability and traction control) and DSTC (dynamic stability and traction control). Parameters marked with DSTC (dynamic stability and traction control) are only displayed on cars equipped with DSTC (dynamic stability and traction control).