Checking The Status

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS CORPORATION

• Ignition on.

  Click the VCT2000 symbol to activate the back-up gear inhibitor.

  Check if the fault is permanent or intermittent.

  It is not possible to engage back-up gear when the back-up gear inhibitor is activated.

  The fault is permanent if the back-up gear inhibitor does not activate.

  If the back-up gear inhibitor is activated, this is an indication that the fault was present previously but that it is not active at the moment, i. e. the fault is intermittent.

  Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA (Volvo Scan Tool)

  Courtesy of VOLVO CARS CORPORATION

Does the value change? 

• YES 

  Refer to VERIFICATION 

• NO 

  Refer to CHECKING THE COMPONENT AND WIRING