Checking The Status

Click the VCT2000 symbol to activate the back-up gear inhibitor.

Check if the fault is permanent or intermittent.

It is not possible to engage back-up gear when the back-up gear inhibitor is activated.

The fault is permanent if the back-up gear inhibitor does not activate.

If the back-up gear inhibitor is activated, this is an indication that the fault was present previously but that it is not active at the moment, i. e. the fault is intermittent.

Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA (Volvo Scan Tool)

Courtesy of VOLVO CARS CORPORATION

Refer to CHECKING THE COMPONENT AND WIRING