Checking The Component And Wiring

Check the cable between engine control module (ECM) terminal #A94 (#B34) and fuel pressure sensor terminal #4. Check for a short-circuit to ground.

Remedy as necessary.

Other information 

• see CONNECTING THE BREAKOUT BOX
• see SIGNAL SPECIFICATION
• see PRESSURE SENSOR, FUEL RAIL (FRP)
• see CHECKING WIRING AND TERMINALS

Fig 1: Identifying 4-Bit Connector

Courtesy of VOLVO CARS CORPORATION

Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA (Volvo Scan Tool)

Courtesy of VOLVO CARS CORPORATION

Fig 3: Identifying Fuel Pressure Sensor

Courtesy of VOLVO CARS CORPORATION

• Continue 

  Refer to VERIFICATION