Diagnostic Trouble Code (DTC) Information ECM-2A0D
Condition
The engine control module (ECM) checks the signal from the fuel temperature sensor. The fuel temperature sensor is integrated in the fuel pressure sensor. The diagnostic trouble code (DTC) is stored if the engine control module (ECM) detects that the signal from the engine coolant temperature (ECT) sensor is too low.
The diagnostic trouble code (DTC) can be diagnosed at ignition on and with the engine running.
Substitute Value
- None.
Possible Source
- Contact resistance or oxidation in the terminals
- Short-circuit to supply voltage in the signal cable
- Open-circuit in the signal cable
- Open-circuit in the signal ground cable
- Damaged temperature sensor.
Fault symptom[s]
- None.