April 5, 2026: LEMON Manuals is launched! Read the announcement.

Calibrating The Position Sensor In The Transmission Control Module (TCM)

Fig 1: Identifying Ignition ON

GLL101051

Courtesy of VOLVO CARS CORPORATION

Check that the transmission cable is correctly adjusted. Adjust if necessary
Ignition on
Place the gear selector lever in neutral position (N).
Activate calibration of the position sensor in the transmission control module (TCM) by clicking on the VCT2000 symbol in VIDA (Volvo scan tool).

Other information
- see GEAR SELECTOR CABLE, ADJUSTING
Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA (Volvo Scan Tool)
Courtesy of VOLVO CARS CORPORATION

Fig 3: Identifying Control Module/Gear-Shift Position Sensor
Courtesy of VOLVO CARS CORPORATION

Continue
Refer to VERIFICATION