Checking Function Of The Gear Position Sensor
- Ignition on
- Read off the Geartronic status by clicking on the VCT2000 symbol in VIDA (Volvo scan tool)
- Depress the brake pedal. Move the gear selector to "M" (manual) position and check that the status changes
- Move the gear selector to + and check that the gear selection is updated in the VIDA display and in the display on the driver information module (DIM)
- Move the gear selector to -. Check that the gear selection is updated.
If the gear selector position is not updated, replace the gear selector module (GSM).
Other information
Courtesy of VOLVO CARS CORPORATION
Was the function OK?
- YES
OKAY: Troubleshooting has been completed.
- NO
Refer to VERIFICATION