Checking The Status

HINT: This diagnostic trouble code (DTC) can be stored for faults that are detected by the central electronic module (CEM).

NOTE:

If there are diagnostic trouble codes (DTC) for the fuel pump (FP) or the relay for the fuel pump stored in the central electronic module (CEM), these must be fault traced accordingly.

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS CORPORATION

Ignition on.
Check whether the fault is permanent or intermittent. Read off the diagnostic trouble code (DTC) fault status when the diagnostic status is "Completed".

The fault is permanent if the fault status is "Fault found". The fault is intermittent if the fault status is "No fault detected".

Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA (Volvo Scan Tool)
Courtesy of VOLVO CARS CORPORATION

Fig 3: Identifying Fuel Pump (FP) Control Module
Courtesy of VOLVO CARS CORPORATION

Continue
Refer to CHECKING THE COMPONENT AND WIRING