Diagnostic Trouble Code (DTC) Information BCM-E000: Notes
Condition
The control modules in the car continually transmit and receive information over the network (control area network). The diagnostic trouble code (DTC) is stored if the brake control module (BCM) registers that communication between the brake control module (BCM) and other control modules is missing or subject to interference.
The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on.
Substitute Value
- Traction Control is blocked
- Stability Control is blocked
- Active yaw control is blocked.
HINT: BRAKE SYSTEM, ABBREVIATIONS
Possible Source
- Interference in the control area network (CAN).
Fault symptom[s]
- The ABS warning lamp is lit
- The warning lamp indicating that the brake circuit is not functioning is lit
- The warming lamp for traction control function is lit
- Traction control does not function
- The stability control system does not function.