Faulty Signal: Verification: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Engine Start Verification

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Reinstall the connectors, components etc.
• Test drive the vehicle on the road with different engine loads.

  Read off the diagnostic status and the fault status without switching off the engine.

  NOTE:

  If the engine is switched off, the stored fault status will be erased and the test drive will have to be repeated.

  Check that the diagnostic is "Completed" and that the fault status is "No fault detected".

  Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS OF NORTH AMERICA.
  Fig 3: Identifying Test Drive

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Is the fault status "No fault detected"? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to INFORMATION