Diagnostic trouble code (DTC) information
Condition
Diagnostic trouble code (DTC) DDM/PDM-0022 is stored if the control module does not register the signal from Hall sensor H1 or H2 when the power window lift motor is activated.
Substitute Value
- None.
Possible Source
- Hall sensors H1 and H2 not working.
- Short-circuit in the signal cable for Hall sensor H1 and H2.
- Open-circuit in the signal cable for Hall sensor H1 and H2.
- Open-circuit or short-circuit to ground in the power supply or ground lead for the Hall sensor.
Fault symptom[s]
- Automatic window closure does not function.