Internal fault. Permanent fault: Verification: Verification
HINT: After carrying out the repair, check that the fault has been remedied.
- Ignition off
- Reinstall the connectors, components etc.
- Ignition on
- Activate the System test to test the memory of the RTI control module. See System Test
.
Check if the RTI control module memory is OK or not. OK is displayed if the memory functions.
HINT: Tell the customer that it may take 15 minutes of driving before the system is calibrated and functioning satisfactorily.
Is the road traffic information (RTI) system functioning?
- YES
VERIFIED: Troubleshooting has been completed.
- NO
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.