Signal too low. Permanent fault: Verification: Verification

HINT: After the repair it is necessary to check that the fault has been rectified. 

Fig 1: Identifying Ignition Switch ON Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Connector(s) Reinstallation

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off.
• Connect the connectors, install the components, etc.
• Ignition on.

  Read the diagnostic trouble codes.

  If diagnostic trouble code has changed to intermittent status this indicates that the fault is no longer activated.

  Fig 3: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Is the diagnostic trouble code intermittent? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to Information