Checking Fusebox

Remove windshield wiper relay 2/182 from the fusebox base.

Check the relay coil driver circuit for a short-circuit to supply voltage. Take a voltmeter reading between terminal #2 and ground in the relay base.

The voltage between terminal #2 and ground must be approximately 0 V.

Remedy as necessary.

Other information 

• See Contents

Fig 1: Identifying Fusebox

Courtesy of VOLVO CARS OF NORTH AMERICA.

Was a fault detected? 

• YES 

  Refer to Verification 

• NO 

  Refer to Checking the Wiring