Activating Components And Functions
NOTE:
A short delay can occur before a component is activated. Remote control activations can only be carried out if the key is not in the ignition. Lock activations can only be carried out if the doors are shut.
With this function the components and functions associated with the upper electronic module (UEM) can be activated.
The following components / parameters can be activated in alternative ways:
- General lighting, directly to the lamp
- Front left reading lamp, directly to the lamp
- Front right reading lamp, directly to the lamp
- Rear left reading lamp, directly to the lamp
- Rear right reading lamp, directly to the lamp
- Extended X-supply
- Power supply to mass movement sensor (MMS)
- Seat belt reminder
- Indicates that the passenger airbag (PAD) is disconnected (from 2005-)
- Remote control, activate the button
- Local lightingNOTE:
The following activations for the sun roof can be made from a separate vehicle communication input for the upper electronic module (UEM).
- Button activation, forward
- Button activation, backward
- Motor, forward
- Motor, backward.