Driving Schedule

• Start the engine
• Shift gear selector to drive
• Accelerate gently to 1500-2000 rpm
• Drive for 5 minutes at 1500-2000 rpm
• Run the engine at idle speed for 60 seconds
• Drive engaged, air conditioning (A/C) off
• Drive for 6 minutes at 1500-2000 rpm
• Run the engine at idle speed for 40 seconds
• Drive engaged, air conditioning (A/C) switched off
• air conditioning (A/C) off
• Drive for 5 minutes at 1500-2000 rpm
• Run the engine at idle speed for 60 seconds
• Drive for 5 minutes at 1500-2000 rpm
• Engine brake from 4000 rpm to approximately 1300 rpm a few times.
  NOTE: Do not use the accelerator pedal (AP) during engine braking.
• Press the accelerator pedal (AP) to the floor a few times.

• The above driving schedule does not cover leak diagnostic and thermostat diagnostic.

HINT: In order to carry out leak diagnostic, see VIDA vehicle communication (Quick test of the fuel tank system). Certain markets only.