Diagnostic Trouble Code (DTC) Information FSM-U300098
Condition
The control modules checks internal components in the system.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The ambient temperature is greater than 70 °C.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition on for at least 5 seconds.
NOTE:
The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.
Substitute Value
- None.
Possible Source
- The ambient temperature is greater than 70 °C.
Fault symptom[s]
- Warning lights and chimes/Bulb failure indication/no indication
- Warning lights and chimes/Front monitoring/Active safety indication/no indication
- Brake pedal/Excessive "brake pedal effort" required
- Text window and warning symbol/Text message
- Front monitoring/Active safety/Driver Alert Control does not work
- Front monitoring/Active safety/Lane Departure Warning does not work