Diagnostic Trouble Code (DTC) Information PAC-U200D11
Condition
A camera is connected to the parking assistance camera (PAC) module. This camera is supplied power by the parking assistance camera (PAC) module. The diagnostic trouble code is generated if the power supply is short circuited to ground.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The power supply to the camera is less than 5 V when the camera is powered.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Reverse gear is engaged.
NOTE:
The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.
Substitute Value
- None.
Possible Source
- Damaged cable between control module and camera.
- Damaged camera.
- Damaged control module.
Fault symptom[s]
- Front/rear park assist/Does not work