Power Supply Mode

Shows present current supply mode. The current supply mode affects which functions and systems are active or are possible to activate.

The values that may be shown are:

• Key removed

  This mode is reached 1 minute after the key has been removed from the ignition. The functions in the car that still are supplied with voltage are, e. g., alarm system and the system for keyless vehicle.

• Key recently removed

  This mode is reached directly after the key has been removed from the ignition, and lasts for 1 minute. Functions such as Key warning and communication services for, e. g., phone module are usable this extra minute.

• Key approved

  The key is in the ignition, position 0, and the key is approved according to the ID-list stored in the Central electronic module (CEM).

• Ignition off after accessory position

  Key in position 0 after it has been in position 1. Synchronization of activities related to internal work memories takes place.

• Accessory position

  Key in position 1. Infotainment functions and telematic functions are fully available until the units sense low voltage from the battery. Then they go to energy save mode.

• Accessory position after Ignition on

  Key in position 1 after the engine has been running. Normal accessory mode plus the functions that are related to the engine being shut off.

• Ignition on

  Key in position 2.

• Running

  Key in position 2 and engine running.

• Start attempts

  Key in position 3. Starter motor tries to start the engine.