BCM-U042864: Invalid Data Received From Steering Angle Sensor Module. Algorithm Based Failures. Signal Plausibility Failure (2008-2010): Fault-Tracing: Verification
NOTE:
After carrying out the repair, check that the fault has been remedied.
- Ignition off.
- Reconnect the connectors, reinstall components etc.
- Test drive the vehicle following:
- Ignition on.
Read off the status of the diagnostic trouble code (DTC).
Is the status of the diagnostic trouble code (DTC) intermittent?
- YES
OKAY: Troubleshooting has been completed.
- NO
Refer to INFORMATION