Oil Pressure And Temperature Sensor: Check

Conditions (unless otherwise specified):

• Readings taken on loose component.

Oil pressure sensor: 

Connect 5 V direct current between the sensor's terminal pin #2 and #4. Take readings between #3 and #4. The value must be 0.25 - 0.50 V.

Oil temperature sensor: 

Measure the resistance between sensor's terminal pin #1 and #4, The value should be:

R = approximately 7.0 kΩ at +15 °C.

R = approximately 5.7 kΩ at +20 °C.

R = approximately 4.7 kΩ at +25 °C.

R = approximately 3.9 kΩ at +30 °C.

R = approximately 3.2 kΩ at +35 °C.