Diagnostic Trouble Code (DTC) Information CEM-B102481

Condition 

Central electronic module (CEM) checks communication with Start control module (SCU).

The diagnostic trouble code (DTC) is stored if the control module detects that:

• The serial communication from Start control module (SCU) is incorrect.

The control module's test for the diagnostic trouble code (DTC) starts in the event of:

• Communication with Start control module (SCU).

Fig 1: Identifying Start Control Unit (SCU)

Courtesy of VOLVO CARS CORPORATION

Substitute Value 

• None.

Possible Source 

• Incorrect communication from Start control module (SCU).

Fault symptom[s] 

• Starter motor does not operate
• Message in information display