The Signals From The Start Control Module (SCU) To The Central Electronic Module (CEM)

Indicates signals transmitted via LIN from the start control module (SCU) to the central electronic module (CEM).

The values that may be shown are:

• Switch 1 at start button (LIN-signal). Not activated/Activated
• Switch 2 at start button (LIN-signal). Not activated/Activated

  -Switch 1 at start button, directly connected. Not activated/Activated (Switch 1 is both directly connected and connected VIA LIN-signal.)

• Switch for indicating key in ignition. Not activated/Activated
• Switch for activating key ejection. Not activated/Activated

  Contact breaker activated only when the key is docked and pressed in at removal. 

• Locking key. Not activated/Activated