CAMSHAFT'S Shift Angle -Intake Bank X (Ca)

The engine control module (ECM) calculates the value using the signals from the engine speed (RPM) sensor (crankshaft position) and the camshaft position (CMP) sensor (camshaft position).

The value indicates how much the camshaft is deployed. When the camshaft is in its 0-position (camshaft not deployed), the angle is 0° CA. When the camshaft is fully deployed, the angle is approx. 45° CA.

Normal value at idle, engine at operating temperature, approximately 0° CA.

CA = Crank Angle (crankshaft degrees)

HINT: The value must follow the parameter "Camshaft shift angle, intake desired value".