Diagnostic Trouble Code (DTC) Information SAS-U300044

Condition 

The Steering wheel angle sensor module (SAS) is located in the lever module together with the steering wheel module (SWM) and is supplied with power by it. Only the steering wheel angle sensor module (SAS) communicates on the controller area network (CAN).

A diagnostic trouble code (DTC) is stored if the control module detects:

• Internal memory fault.

The control module's test for the diagnostic trouble code (DTC) starts in the event of:

• Ignition switch position II.

Substitute Value 

• The control module transmits a message to other nodes on the CAN network that its information is incorrect.

Possible Source 

• Damaged steering wheel angle sensor.

Fault symptom[s] 

• Information lamp is on
• Anti-spin warning lamp lit
• Traction control not working
• Stability function is not working
• Four-C function not working