Lock-Up Solenoid, SLU

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2014 Volvo XC90, 2013 Volvo XC90, 2012 Volvo XC90, 2011 Volvo XC90, and 2010 Volvo XC90. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Lock-Up Solenoid, SLU

Courtesy of VOLVO CARS CORPORATION

The lock-up-solenoid, SLU is located in the gearbox control system, which is mounted on the front edge of the gearbox.

The lock-up-solenoid, SLU consists of an electric coil that controls a hydraulic valve. The solenoid is controlled, like all linear solenoids in the gearbox, by a pulsed (PWM) current with a frequency of 300Hz and grounded via the Transmission Control Module (TCM). The average value on the current signal that deploys the solenoid varies between 0.1 A and 1 A and the demand controls the deployment.

The solenoid controls the torque converter's Lock-up engagement. Engagement occurs by the solenoid pulsing, which gives a smooth engagement of the lock-up function. The solenoid allows the torque converter to work in one of three positions:

Open
Controlled slipping
Locked.

The hydraulic function of the solenoid is linear.

There is a diagnostic for the lock-up solenoid.