Checking The Component

Fig 1: Identifying Ignition OFF

Courtesy of VOLVO CARS CORPORATION

Check the cable for short-circuit to ground.

Take readings between:

• Solenoid for P-position lockout and Gear selector module (GSM).

Check the solenoid's resistance by connecting an ohmmeter between terminals #1 and #2 on the solenoid's connector.

For the resistance values, see below. Replace the solenoid if the resistance is incorrect.

Other information 

• see CHECKING WIRING AND TERMINALS
• see SOLENOID GEAR SELECTOR ASSEMBLY
• see COMPONENT SPECIFICATIONS

Fig 2: Locating Gear Selector Module (GSM)

Courtesy of VOLVO CARS CORPORATION

• Continue 

  Refer to VERIFICATION