Programming The Service Time Parameters

Fig 1: Checking Traffic Load On CAN Cables

Courtesy of VOLVO CARS CORPORATION

There are three service parameters that can be programmed. This parameter is used to set the number of months before the Service Reminder Indicator (SRI) lights.

The following options are available:

• 6 months
• 12 months

Read the input data.

If the service parameter is to be changed, key the necessary value into the scrolling list and start the programming.

Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

Courtesy of VOLVO CARS CORPORATION

• Continue 

  Refer to PROGRAMMING THE ENGINE SERVICE TIME PARAMETERS