Connecting And Installing The Multimedia Module (Mmm)

Fig 1: Multimedia Module

Courtesy of VOLVO CARS CORPORATION

• Take the Multimedia Module (MMM) from the kit and remove the protective plug from the connector to the fiber optic cable connection.

Fig 2: Identifying Terminal Identification For Multimedia Module

Courtesy of VOLVO CARS CORPORATION

Connect the pre-routed cables to the Multimedia Module (MMM) 

• the cable (1) for the display screen.
• cable (2) to the car's fiber optic cable system.
• cable (3) to the power supply.
• cable (4) to the Global Positioning System (GPS) antenna.
• cable (5) to TMC (Europe).

Applies to cars with Volvo On Call (VOC) 

• Secure the cable excess for the GPS antenna in a suitable location.
• When connecting cable (2), existing cables must be used, not those supplied in the kit.

Fig 3: Installing Multimedia Module

Courtesy of VOLVO CARS CORPORATION

• Take four screws from the kit, place the Multimedia Module (MMM) mounting brackets above the rivet nuts and tighten the unit.
• Conceal the cables under the carpet at the rear of the Multimedia Module (MMM).
• Bend the carpet tabs back over the screws.
  NOTE:

  Do not damage the fiber optic cables. They must not be bent to a radius less than 30mm (1 11/64") as they may become damaged and affect the function of the Multimedia Module (MMM).