Checking The Power Supply And Ground Terminal
- Ignition off.
Check the cable between central electronic module (CEM) terminal #E36 (#36) and siren control module (SCM) terminal #A3. Check for an open-circuit.
Check the signal cable between central electronic module (CEM) terminals #G1 (#1) and siren control module (SCM) terminal #A2. Check for an open-circuit. Check for a short-circuit to ground. Check for a short-circuit to supply voltage.
Check the cable between siren control module (SCM) terminal #A1 and ground. Check for an open-circuit. Also check the ground terminal for oxidation.
Remedy the cables as necessary.
Other information
Was a fault detected?
- YES
Refer to VERIFICATION
- NO
Refer to REPLACING THE CONTROL MODULE