Programming Of Global Opening/Closing Of Windows

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS CORPORATION

There are four programming positions to choose from: 

• Global opening not activated, global closing activated.
• Global opening not activated, global closing not activated.
• Global opening activated, global closing activated.
• Global opening activated, global closing not activated.

Proceed as follows: 

• Ignition on
• Click on the symbol for VCT2000 to start programming.
• Select one of the above alternatives.

Check that programming has been successful: 

• Ignition off
• Remove the ignition key.
• Try to close and open all windows using the remote control.

Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA (Volvo Scan Tool)

Courtesy of VOLVO CARS CORPORATION