Software Fault: Verification: Verification

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

In order that the diagnostic trouble code (DTC) test can be rerun, the Phone module (PHM) must be restarted. Do this by:

• Remove the key from the ignition switch.
• Wait 30 seconds.
• Ignition switch position II.

Check the carphone by making a call.

Read diagnostic trouble codes by clicking the VCT2000 symbol.

Check that the current DTC has disappeared or changed status from permanent to intermittent fault.

Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

Courtesy of VOLVO CARS OF NORTH AMERICA.

Are the diagnostic trouble code (DTCs) still stored? 

• YES 

  Refer to INFORMATION 

• NO 

  OKAY:  Troubleshooting has been completed.