Checking The Component And Wiring
Check the terminal on the infotainment control module (ICM). Check for contact resistance and oxidation. Check for damage.
Check the fuse for the infotainment control module (ICM).
Check the power supply cable between central electronic module (CEM) C1/21 and infotainment control module (ICM) terminal #1 (#A1). Check for an open-circuit. Check for a short-circuit to ground.
HINT: A diagnostic trouble code (DTC) is stored in the central electronic module (CEM) if there is a fault in the control of the infotainment relay.
Check the ground lead between infotainment control module (ICM) terminal #3 (#A3) and the ground terminal. Check for an open-circuit. Check for a short-circuit to supply voltage. Also check the ground terminal. Check for contact resistance and oxidation.
Remedy as necessary.
Other information
- See: CONNECTING THE BREAKOUT BOX
- See: SIGNAL SPECIFICATION
- See: INFORMATION AND ENTERTAINMENT DISPLAY
- See: CONTENTS
- Continue
See: VERIFICATION