Checking Shift Solenoids S1 And S2

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS CORPORATION

• Ignition on.
• Gear selector in position P.
• Activate solenoids S1 and S2 individually.

  The values should change between OFF and ON.

  Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS CORPORATION

Do the values change? 

• YES 

  FAULT TRACING FAILED:  The fault should have been detected and remedied. As this is not the case fault-tracing has failed. Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

• NO 

  Refer to REPLACING THE CONTROL MODULE AND PROGRAMMING