Diagnostic Trouble Code Information BCM-C110687
Condition
NOTE:
The diagnostic trouble code only applies to vehicles equipped with DSTC.
Diagnostic trouble code BCM-C110687 is generated if the brake control module (BCM) registers that the wheel or steering wheel alignment is defective.
Substitute Value
- TC is blocked.
- SC is blocked.
- AYC is blocked.
HINT: For information on abbreviations: BRAKE SYSTEM, ABBREVIATIONS
Possible Source
- Defective wheel alignment.
- Defective steering wheel alignment.
- Damaged steering angle sensor.
NOTE:
This diagnostic trouble code (DTC) is not due to an internal hardware fault in the Brake control module (BCM) and must not be remedied by replacing the control module.
Fault symptom[s]
- General warning light on.
- Anti-spin is not operational.
- The stability function is not operational.
- The anti-skid function is not operational.