ECM-B102486: Start Control Unit. Bus Signal / Message Failures. Signal Invalid (B6324S; 2007-2010): Fault-Tracing: Information

No fault-tracing has been developed for this diagnostic trouble code (DTC).

The diagnostic trouble code (DTC) for this fault is first stored in the Central electronic module (CEM), then in the Engine control module (ECM). This diagnostic trouble code (DTC) can first be erased when the root fault has been remedied and the diagnostic trouble code (DTC) for the root fault has been erased.

For further information on this diagnostic trouble code, see Diagnostic trouble code (DTC) information.