Connecting The Breakout Box
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2013 Volvo C70, 2012 Volvo C70, 2011 Volvo C70, 2010 Volvo C70, and 2009 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition off
- Remove fuses F3, F4, F12, F16 and F18 from the integrated relay/fusebox in the engine compartment
- To expose the connectors for the central electronic module (CEM), see:
Connect breakout box see 9511428 to the adapter.
Disconnect the breakout box in reverse order.
NOTE:
Before the control module can be checked and measurements taken, the removed fuses must first be reinstalled.
Central electronic module (CEM)
- Connect adapter see 9512899 to control module connectors A, B, C, D, E, F, G and H.
- For connector A, terminals #A1-#A46 correspond to terminals #1-#46 in the breakout box, when the breakout box is connected to output A
- For connector B, terminals #B1-#B32 correspond to terminals #1-#32 in the breakout box, when the breakout box is connected to output B
- For connector C, terminals #C1-#C46 correspond to terminals #1-#46 in the breakout box, when the breakout box is connected to output C
- For connector D, terminals #D1-#D14 correspond to terminals #1-#14 in the breakout box, when the breakout box is connected to output D/H
- For connector E, terminals #E1-#E41 correspond to terminals #1-#41 in the breakout box, when the breakout box is connected to output E
- For connector F, terminals #F1-#F32 correspond to terminals #1-#32 in the breakout box, when the breakout box is connected to output F
- For connector G, terminals #G1-#G32 correspond to terminals #1-#32 in the breakout box, when the breakout box is connected to output G
- For connector H, terminals #H1-#H32 correspond to terminals #15-#46 in the breakout box, when the breakout box is connected to output D/H.
Other information