Connecting The Breakout Box

Fig 1: Identifying Breakout Box

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off
• Remove the fuse
• Remove the side panel
• Disconnect the control module connector.

Connect adapter 9511463 to the control module connector. Connect breakout box 9511428 and wiring 9511499 to the adapter.

Alternatively, breakout box 9813190 can be connected to the adapter.

Disconnect the breakout box in reverse order.

Other information: 

• For left-hand drive cars, See SIGNAL SPECIFICATION
• See CONTROL MODULE FRONT SEAT